Table of Contents
Advertisement
Stratix 6000 Ethernet Managed Switches
ATTENTION: Read this document and the documents listed in the Additional
Resources section about installation, configuration, and operation of this
equipment before you install, configure, operate, or maintain this product. Users
are required to familiarize themselves with installation and wiring instructions in
addition to requirements of all applicable codes, laws, and standards.
ATTENTION: Activities including installation, adjustments, putting into service,
use, assembly, disassembly, and maintenance are required to be carried out by
suitably trained personnel in accordance with applicable code of practice.
In case of malfunction or damage, no attempts at repair should be made. The
module should be returned to the manufacturer for repair. Do not dismantle the
module.
ATTENTION: This equipment is certified for use only within the surrounding air
temperature range of 0...60 °C (32...140 °F). The equipment must not be used
outside of this range.
ATTENTION: Electrical Safety Considerations
Power to this equipment must be supplied from a source compliant with the
following:
• Class 2 approved to UL1310
• SELV source approved to EN/IEC60950-1, EN/IEC61010-2-201 or
EN/IEC62368-1 (ES1)
Rockwell Automation Publication 1783-IN004C-EN-P - April 2016
3
Hide quick links:
Advertisement
Table of Contents
