Table of Contents
Advertisement
c. From the Ethernet Protocol (TCP/IP) Properties menu, change the
IP address to 192.168.1.3 and subnet mask to 255.255.255.0.
2. Connect to the switch via a Web browser by using these steps.
a. Open a browser window.
b. Enter the default IP address of 192.168.1.1 in the address bar, press
Enter, and note the following defaults:
• User name is blank.
• Password is PASSWORD.
3. Configure the switch.
You can get complete configuration instructions by clicking the link to
view the embedded manual.
4. If the switch is to scan in a Logix5000™ program, refer to the appropriate
section of your embedded manual.
Rockwell Automation Publication 1783-IN004C-EN-P - April 2016
Stratix 6000 Ethernet Managed Switches
17
Hide quick links:
Advertisement
Table of Contents
