Stratix 6000 Ethernet Managed Switches
Use the Switch
To start using your switch, follow this procedure. For information about the
status indicators on the switch, refer to the Stratix 6000 Ethernet Managed
Switch User Manual, publication 1783-UM001.
1. Connect to the LAN card in your computer by using a patch or
cross-over cable, and then do the following.
a. Choose Start > Settings > Network Connections and right-click
Local Area Connection and Properties.
b. From the Local Area Connection Properties menu, check Ethernet
Protocol (TCP/IP), and click Properties.
16
Rockwell Automation Publication 1783-IN004C-EN-P - April 2016