Table of Contents
Advertisement
Stratix 6000 Ethernet Managed Switches
Install an Optional SFP Module
ATTENTION: (Applies only to 1783-EMS08T switches with optional SFP). Under
certain conditions, viewing the optical port may expose the eye to hazard. When
viewed under some conditions, the optical port may expose the eye beyond the
maximum permissible exposure recommendations.
ATTENTION: (Applies only to 1783-EMS08T switches with optional SFP). Class 1
laser product. Laser radiation is present when the system is open and interlocks
bypassed. Only trained and qualified personnel should be allowed to install,
replace, or service this equipment.
You can install a 1G fiber small form-factor pluggable (SFP) module into the
fiber-optic Ethernet slot on the bottom to the 1783-EMS08T switch. To install
the SFP module, grasp the module on the sides and insert it into the slot until
you feel the connector snap into place.
For detailed instructions on installing, removing, and connecting to SFP
modules, see the documentation that shipped with the SFP module.
Available SFP modules include the following:
• 1783-SFP1GSX - 1000Base-SX multi-mode fiber transceiver
• 1783-SFP1GLX - 1000Base-LX single-mode fiber transceiver
8
7
6
5
4
3
1
2
14
Rockwell Automation Publication 1783-IN004C-EN-P - April 2016
31877-M
Hide quick links:
Advertisement
Table of Contents
