Rear Wiper Motor - Subaru IMPREZA 2001 Service Manual

10.Rear Wiper Motor

A: REMOVAL
1) Remove rear wiper arm.
2) Remove cap (A), nut (B), and spacer (C) from
rear wiper shaft.
3) Remove rear gate lower trim. <Ref. to EI-34,
REMOVAL, Rear Gate Trim.>
4) Unclip clip of harness and disconnect connector
of wiper motor.
5) Loosen bolts to remove wiper motor assembly
(A).
B: INSTALLATION
1) Install in the reverse order of removal.
2) Install rear wiper cushion with the arrow mark
facing up, as shown in the figure.
REAR WIPER MOTOR
C: INSPECTION
1) Connect battery to wiper motor connector and
confirm that wiper motor operates.
2) Connect battery to terminal of connector and re-
move terminal connections with motor rotated, and
stop wiper motor through operation.
B6M1202A
3) Connect battery and confirm that motor stops at
automatic stop position after motor operates at low
speed again.
BO0207
B5M1463
WW-21
WIPER AND WASHER SYSTEMS
S6M0072
S6M0073
S6M0074