Wiper Control Relay - Subaru IMPREZA 2001 Service Manual

WIPER AND WASHER SYSTEMS

12.Wiper Control Relay

A: REMOVAL
1. WAGON
1) Remove right quarter lower trim. <Ref. to EI-30,
REMOVAL, Rear Quarter Trim.>
2) Loosen nut to remove control unit.
B: INSTALLATION
1. WAGON
Install in the reverse order of removal.
C: INSPECTION
1. WAGON
1) Disconnect the connector from the wiper control
relay.
2) Connect the positive (+) lead from the battery to
terminal 8 and the negative (−) lead to terminal 6.
Connect the positive (+) lead from the voltmeter to
terminal 3 and negative lead to ground.
4 3 2 1
8 7 6 5
3) Measure the voltage when the wiper relay is op-
erated.
WIPER CONTROL RELAY
If operation is not as specified, replace the switch.
BO0209
BO0276
B6M1523A
WW-24