Installing base cover
1
Toe in the base cover front edge into the system.
2
Press the edges of the cover until it clicks into place.
3
Replace the M2.5x7 screws to secure the base cover to the computer.
4
Install the
microSD card
5
Follow the procedure in
Battery
Removing battery
1
Follow the procedure in
2
Remove the:
a
microSD card
b
base cover
3
To remove the battery:
a
Disconnect the battery cable from the connector on the system board [1].
b Remove the M2.0x3.0 screws that secure the battery to the computer [2].
c
Lift the battery away from the computer [3].
Installing battery
1
Insert the battery into the slot on the computer.
2
Connect the battery cable to the connector on the battery.
10
Removing and installing components
After working inside your
computer.
Before working inside your
computer.