Installing touchpad
1
Place the touchpad into the slots on the computer.
2
Place the metal bracket, and affix the adhesive tape.
3
Replace the screws (M2.0x3.0, M.2.0x2.0) that secure the metal bracket on the computer.
NOTE:
Affix the adhesive tape that secures the speaker cable on the metal bracket.
4
Connect the touchpad cable.
5
Affix the adhesive tape to secure the speaker cable on the computer.
6
Connect the speaker cable to the connector on the system board.
7
Install the:
a
speaker
b
battery
c
base cover
d
microSD card
8
Follow the procedure in
System board
Removing system board
1
Follow the procedure in
2
Remove the:
a
microSD card
b
base cover
c
battery
18
Removing and installing components
After working inside your
computer.
Before working inside your
computer.