NOTE:
The display back-cover and antenna assembly cannot be further disassembled once all the pre-removal parts
procedures are completed. The picture and table below shows the display back-cover and antenna assembly after
performing the pre-removal parts procedures for any display back-cover and antenna assembly replacement.
a
Display cable
b
LED Daughter board
c
Camera module
d
Wireless Antennas (Main+Aux)
e
Right Display Hinge
f
Left Display Hinge
Installing display back cover
1
Align the display back cover with the tabs on the computer, and press it until it clicks into place.
2
Follow the procedure in
Installing camera
1
Place the camera on the display assembly.
2
Connect the camera cable to the connector on the display assembly.
3
Install the:
a
display panel
b
display bezel
c
display assembly
d
battery
e
base cover
f
microSD card
30
Removing and installing components
After working inside your
computer.