Table of Contents
Advertisement
Operating Manual
Synthesis Tilt Recliner
Model: V4
Distributor/Rep: This manual must
be given to the caregiver responsible
for this chair and its occupant.
Caregiver: Before using this chair,
read this manual thoroughly and save
for future reference.
Actual product may differ slightly from images in Operating Manual
Advertisement
Table of Contents
Troubleshooting
Related Manuals for broda V4
Summary of Contents for broda V4
- Page 1 Operating Manual Synthesis Tilt Recliner Model: V4 Distributor/Rep: This manual must be given to the caregiver responsible for this chair and its occupant. Caregiver: Before using this chair, read this manual thoroughly and save for future reference. Actual product may differ slightly from images in Operating Manual...
-
Page 2: Table Of Contents
Inspection ..............................15 Functional Testing ............................16 TECHNICAL INFORMATION .......................... 17 Specifications ............................. 17 BRODA Seating Synthesis Parts Schematic Drawing ................18 COMMON TROUBLESHOOTING AND REPAIR ..................20 Troubleshooting for Gas Cylinders ......................34 Rear Casters ............................... 35 WARRANTY ..............................36... -
Page 3: Foreword
F OREWORD... -
Page 4: General Information
BRODA reserves the right to make changes to the specifications, dimensions, functions, or components of its products without notice. Product representations in this manual may vary from delivered products. Each BRODA chair has a unique identifying serial number that must be maintained on the chair as well as with any equipment records. -
Page 5: Definitions
D EFINITIONS “BRODA” means BRODA Enterprises Inc. doing business as BRODA Seating. “BRODA chair” refers to chair model Synthesis Model V4. “Long-Term Care Institution” refers to a nursing home, hospital, or other healthcare facility that provides health and personal care to its residents on a long-term basis. -
Page 6: Safety Requirements
The V4 is not to be used in the shower. The frame and components will rust, and will void the warranty. The chairs are not explosion resistant and must not be used where there are flammable gases or liquids present (e.g., anesthetics, volatile solvents and cleaners, etc.) -
Page 7: Pre-Service Check
BRODA chairs should be kept in a clean, dry environment. Do not leave BRODA chairs outdoors as it may cause the paint to peel. Upon receipt, the shipping carton must be immediately examined for damage. Any damage should be noted on the delivery receipt and a request for inspection by the transportation company should be made. -
Page 8: Re-Positioning Of Resident - "Danger Of Clamping
If after being fully dressed, a resident’s bare arms, legs, or body could still come into direct contact with the vinyl straps or vinyl pads, we recommend the use of a covering, such the BRODA terry cloth covered seat and/or back pad or a folded cloth bed sheet to prevent direct contact. Direct contact of bare skin on the straps over a period of time could cause moisture on the resident, and/or cause the skin to stick to the straps. -
Page 9: Improper Use
The frame and components of the chair can be cleaned using the same procedure as the vinyl. The steps below are also located in the Cleaning Guide found on the back of the Broda chair Staining Agent Cleaning Procedure... -
Page 10: Maintenance
M aintenance 1 5 B The maintenance on a BRODA chair will vary with the amount of use and the condition of the resident using the chair. In regular use, after the initial inspection and functional testing, the chair should be inspected and tested bimonthly. - Page 11 Residents who have involuntary movements. Residents weighing over 220 lbs. A facility with irregular or sloped surfaces. Any unauthorized person. Do not use lubricants that contain solvents. Solvents may compromise any rubber components on the chair. If necessary, white food grade grease or lubricant can be used on any sliding components.
-
Page 12: Resident Specific Instructions
BRODA representatives are not professional caregivers and will not know the specific requirements of the individual using the chair. BRODA relies on the knowledge, experience, and judgment of the resident’s professional caregiver to ensure the specific resident’s safety and comfort needs are satisfied while using the chair. -
Page 13: Operation And Movement
O PERATION AND MOVEMENT Safety measures as described in Section 1 must be observed when operating the chair’s functions or moving the chair. Only authorized caregivers should attempt to operate or move a chair. The caregiver must use proper body mechanics when operating the chair, and be prepared to support the weight of the resident while operating the chair. -
Page 14: Elevating Leg Rest
2 0 B Gas cylinders allow the leg rest to be positioned infinitely from horizontal to vertical. The leg rest elevates and extends with recline on the V4. It is also independently adjustable. To Adjust the Leg Rest: -Hold leg rest to assist movement and squeeze the leg rest handle. -
Page 15: Removable Wings
R emovable Wings 2 2 B Wings support the Shoulder Bolsters which provide upper body lateral support. The wings are width and height adjustable to accommodate various residents. To Remove the Wing: -Loosen the knob (1) and pull the wing from the receptacle. -
Page 16: Swing Away/Removable Arms
S wing Away/Removable Arms 2 4 B The swing away removable arms allow for side access to Swing Away/Removable Arms facilitate safe and easy transfers. To Remove the Arms: - Push the button on the front of the seat, while pulling out the arm. -
Page 17: Casters
We recommend BRODA accessories for use only on BRODA chairs. The correct installation of the BRODA accessory is very important. We recommend that the BRODA chair is ordered with the required accessories already installed. Only authorized caregivers who thoroughly understand the accessory installation procedures should attempt to install their BRODA accessories without assistance from their local BRODA representative. -
Page 18: Functional Testing
inspected on a bimonthly basis. The visual inspection procedure should include at least the observation of all the fittings (fasteners): The visual inspection procedure should include at least the observation of the following parts: The cylinders that position the seat tilt, back recline, and independent leg rest elevation. The vinyl straps used in the seat, back, leg rest, footrest and wings The cushions The 3 black handles and cables. -
Page 19: Technical Information
Seat Tilt: Up to 40º of seat tilt (infinitely adjustable) Frame: Powder coated steel BRODA Comfort Tension Seating® Strapping is 1-1/2” wide, by 1/8” thick; contains Seat/Back Surface: fungicide, has shape memory retention, is fire retardant Arms: Seat mounted arms... -
Page 20: Broda Seating Synthesis Parts Schematic Drawing
B RODA Seating Synthesis V4 Parts Schematics 3 1 B 3 2 B... -
Page 36: Troubleshooting For Gas Cylinders
COMMON TROUBLESHOOTING AND REPAIR Please have the chair serial number ready when contacting BRODA or your local area representative for parts or assistance for your chair. The serial number can be found on a label on the rear of the chair. -
Page 37: Rear Casters
The rear caster is no longer The rear caster must be replaced. by one step on the rear pedal. functional. Contact BRODA or your local The rear caster is not engaging into representative. the correct position when using the Rear Pedal... -
Page 38: Warranty
If the defective parts are not returned to BRODA on request, the owner will bear the cost of the replacement parts on invoice from BRODA.