Diverting Third Party Calls - Kenwood TK-285 Instruction Manual And User Handbook

4 To end the call diversion, enter control code
"#41", then press the # or Call key.
• "Calling" appears on the display. While your
request is being processed, "Holding" appears on
the display. When the call divert is cleared,
"Complete" momentarily appears on the display
before returning to the previously selected call
address.

Diverting Third Party Calls

1 Enter control code " 44".
2 Press the
transceiver which you want to divert the calls.
2 Press the
where you want to divert the calls.
3 Press the # or Call key.
• "Calling" appears on the display. While your
request is being processed, "Holding" appears on
the display. When the call divert is set, "Complete"
momentarily appears on the display before
returning to the previously selected call address.
4 To end the call diversion, enter control code
"#44", press the
the transceiver whose calls are being diverted,
then press the # or Call key.
• "Calling" appears on the display. While your
request is being processed, "Holding" appears on
the display. When the call divert is cleared,
"Complete" momentarily appears on the display
before returning to the previously selected call
address.
key, then enter the unit number of the
key, then enter the unit number
key, enter the unit number of
15