Viewing The Stack; Call Diversions; Diverting Your Own Calls - Kenwood TK-285 Instruction Manual And User Handbook

Viewing the Stack

1 Press the Status/ Stack key (default is the A key)
twice to enter the stack.
• If there is no data in the stack, "------------" appears on
the main display and "-00" appears on the 3-digit
sub-display.
2 Rotate the Rotary encoder to view the stack entries.
• "NEW" represents a new entry, "S" represents a status
stack entry, "V" represents a voice stack entry, and "D"
represents a data stack entry.
3 Press the C and D keys to scroll through the
selected entry, to view the entire entry.
4 To erase an entry, select the desired entry and press
the Clear key.

Call Diversions

Diverting Your Own Calls

1 Enter control code " 41".
2 Press the
where you want to divert the calls.
3 Press the # or Call key.
• "Calling" appears on the display. While your
request is being processed, "Holding" appears on
the display. When the call divert is set, "Complete"
momentarily appears on the display before
returning to the previously selected call address.
The
14
key, then enter the unit number
indicator appears on the display and flashes.