Kenwood TK-285 Instruction Manual And User Handbook page 14

2 Initiate the call, depending on how you selected
the call address.
i, ii, and iii (of step 1):
When selecting a call address from memory or
the stack, press the Call key (or the PTT switch if
"PTT to Initiate Call" has been programmed) to
initiate the call.
iv (of step 1):
When using MPT1343 dialing, press the # key to
initiate the call.
• "Calling" appears on the display.
3 When the call is connected, a timer appears on
the display.
• The timer can be set up to either count up
(increasing number) or count down (decreasing
number).
4 Press the PTT switch to transmit; release it to
receive.
• The LED lights red while transmitting.
• The 3-digit sub-display shows your transmit power.
A single triangle ( ) represents low power while
dual triangles (
5 Press the Clear key to end the call. If the call
time expires before you press the Clear key, the
call will be automatically terminated.
• "END" momentarily appears on the display before
returning to the call address of the call you just
made.
10
) represents high power.