Call Diverting - Kenwood TK-7185E Instruction Manual

C D
ALL IVERTING
■ D
Y
IVERTING OUR
1 Enter control code 41 to divert your calls to a different transceiver.
2 Press the
your calls diverted.
3 Press the PTT switch, the Call key, or the # key to set up the call diversion.
• "CALLING" appears on the display.
• When the call divert is set, "COMPLETE" momentarily appears on the display.
Additionally, the
4 To end the call diversion, enter control code #41, then press the PTT switch,
the Call key, or the # key.
• "CALLING" appears on the display.
• When the call divert is cleared, "COMPLETE" momentarily appears on the
display.
■ D
T
IVERTING HIRD
1 Enter control code
2 Press the
calls diverted.
3 Press the
calls diverted.
4 Press the PTT switch, the Call key, or the # key to set up the call diversion.
• "CALLING" appears on the display.
• When the call divert is set, "COMPLETE" momentarily appears on the display.
5 To end the call diversion, enter control code #44 followed by the
the ID number of the unit from which calls are being diverted, then press
the PTT switch, the Call key, or the # key.
• "CALLING" appears on the display.
• When the call divert is cleared, "COMPLETE" momentarily appears on the
display.
D M
IALING ODE
Press the key programmed as Dialing Mode to enter a dialing number using the
keypad.
Note: You can select Dialing Mode when Keypad Operation is set to Programmable.
O C
WN ALLS
key, then enter the ID number of the unit to where you want
icon appears on the display and fl ashes.
P C
ARTY ALLS
44 to divert third party calls.
key, then enter the ID number of the unit from which you want
key, then enter the ID number of the unit to where you want the
key and
13