Installing The Cover Over The Universal Connector; Installing The (Optional Kmc-25) Speaker/ Microphone - Kenwood TK-285 Instruction Manual And User Handbook

Installing the Cover over the Universal Connector

If you are not using the optional
KMC-25 speaker/ microphone,
install the cover over the
univeral connector using the
supplied 4 x 6 mm screw.

Installing the (Optional KMC-25) Speaker/ Microphone

1 Insert the guide of the speaker/ microphone
connector into the groove of the universal connector.
2 Secure the connector in place using the attached
screw.
4