Reviewing Messages In The Stack Memory (Nx-200/Nx-300 Only); Short/Long Messages; Gps Report - Kenwood NEXEDGE NX-200 Instruction Manual

Receiving
is received. Press any key to return to normal operation.
Reviewing Messages in the Stack Memory (NX-200/ NX-300 Only)
1 Press the key programmed as Stack, or press and hold
the key programmed as Selcall, Status, or Selcall +
Status to enter Stack mode.
• The last received message is displayed.
2 Press
I: Caller ID, S: Status Message, M: Short Message
• Press and hold
3 Press
• To delete the selected message, press
the deletion, press
• To delete all messages, press and hold

SHORT/LONG MESSAGES

Received short messages are displayed the same as Status
To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask
your dealer for details.

GPS REPORT

pressing the key programmed as Send the GPS data, or by
data may be automatically transmitted at a preset time interval.
22
to select the desired message.
for 1 second or press
to return to normal operation.
or .
to cycle the
or #
or # for
or .