Raymarine ST40 Wind Owner's Handbook Manual page 34

26
Hold down
Calibration
access
Boat show
mode
CAL
ST40
CAUTION:
Do NOT switch the Boat Show mode on.
This function must only be used for
demonstration purposes.
To save your settings and return to normal operation from any screen,
hold down
DEALER CALIBRATION
and
for approximately 12 seconds
Entry
screen
ST40 WIND
CAL
ST40 WIND
WIND
and for approximately 2 seconds
ST40 Wind Instrument Owner's Handbook
Note:
If there is no key activity when the Entry screen
is displayed, calibration will time out to normal
operation after 5 seconds,
If
If
Factory
defaults
CAL
ST40 WIND
Return to normal
operation with factory
defaults applied
D4766-2