Siemens sitrans LR 400 Instruction Manual And Users Manual page 71

Note: For parameter descriptions, please refer to the associated HART parameters on
pages 30 to 58.
Parameter, menu
identification
4.2.4.2: Level LRV
4.2.4.3: Level damp-
ing
4.2.4.4: MinWarn
level
4.2.4.5: MinLim level
4.2.4.6: MaxLim level Upper limit value of the
4.2.4.7: MaxWarn
level
4.2.4.8: HYST level
4.2.5: Volume param.
4.2.5.1: Volume URV
4.2.5.2: Volume LRV
4.2.5.3: Volume
damping
4.2.5.4: MinWarn vol-
ume
4.2.5.5: MinLim vol-
ume
4.2.5.6: MaxLim vol-
ume
4.2.5.7: MaxWarn
volume
4.2.5.8: HYST volume Hysteresis of the volume
4.2.5.9: Tank charac-
teristic
4.2.5.A: Calibrate/table
or
4.2.5.A: Calculate
7ML19985FH04
Parameters (PROFIBUS PA)
Description
= [1.6]
= [1.7]
Limit before reaching
lower limit value
Lower limit value of the
level (See Functional
Dimensions Diagram)
level (See Functional
Dimensions Diagram)
Limit before reaching
upper limit value
Hysteresis of the level
limit values
Full scale of the volume
Start of scale of the vol-
ume
Damping of the volume
Limit before reaching
lower limit value
Lower limit value of the
volume
Upper limit value of the
volume
Limit before reaching
upper limit value
limit values
Determining the tank
characteristic
SITRANS LR 400 – INSTRUCTION MANUAL
Factory Setting
Setting Possibilities
0 m numerical value
0 m numerical value
20 m numerical value
20 m numerical value
0.5 m numerical value
3
numerical value
20 m
3
numerical value
0 m
1 s numerical value
3
numerical value
0 m
3
numerical value
0 m
3
numerical value
20 m
20 m numerical value
3
numerical value
0.5 m
Calculate Calibrate/table
Calculate
Page 68