Siemens sitrans LR 400 Instruction Manual And Users Manual page 64

4.6.6: Descriptor (according to customer specifications)
Measuring point description
Value
4.6.7: Message (according to customer specifications)
Measuring point message, e.g. the date of the last check or clean
Value
4.6.8: Manufacturer Identification
4.6.8.1: Serial Number (F = unique number)
Factory serial number
Value
4.6.8.2: Order Number (according to customer
specifications)
Device order number (delivery state)
Value
4.6.8.3: Fld Device Revision (F = Number)
Device version
Value
4.6.8.4: Software Revision (F = Number)
Value
4.6.8.5: Hardware Revision (F = Number)
Value
4.6.8.6: Antenna Offset (F = approx. 0.5 m [calibration value])
Distance from sensor to flange
The antenna offset defines the propagation time of the measuring signal between the
sensor and the flange as a distance. It is preset at the factory and cannot be changed.
Page 61
up to any 16 characters
Up to any 32 characters
non-editable
non-editable
non-editable
non-editable
non-editable
SITRANS LR 400 – INSTRUCTION MANUAL 7ML19985FH04