About This Handbook - Raymarine autopilot + ST4000+ Owner's Handbook Manual

Preface

About this handbook

Welcome to the handbook for the ST4000+ wheel and tiller
autopilot systems. This handbook contains two main parts:
Part 1: Using the ST4000+ Autopilot
Chapter 1: Introduction
1
Introduces the autopilot, its features and its use.
Chapter 2: Basic Operation
Covers basic autopilot operation: using Auto mode,
2
interpreting alarms, adjusting autopilot performance and
changing the control unit lighting.
Chapter 3: Advanced Operation
3
Explains how to use Track and Wind Vane modes, and
display data pages.
Chapter 4: Maintenance & Fault Finding
Provides general maintenance procedures and
4
information to help you resolve problems you may
encounter with the autopilot
Part 2: Installing the ST4000+ Autopilot
Chapter 5: Installing the ST4000+
5
Explains how to install your autopilot and its components.
Chapter 6: Setting-up the ST4000+
6
Covers functional testing and dockside procedures after
installation, and initial sea trials.
Chapter 7: Customizing the ST4000+
7
Provides details on adjusting the autopilot settings to suit
your boat.
At the end of this handbook we have included product
specifications, a glossary and index, and templates for installing
different parts of the system.
Note: This handbook contains important information about
installing, using and maintaining your new Raymarine product. To
get the best from the product, please read this handbook thoroughly.
ix
page 1
page 3
page 19
page 33
page 43
page 85
page 101