Chapter 6: Installation
Display Unit Connection
The rear of the display provides the following connection sockets:
• SeaTalk, for SeaTalk data input and output.
• NMEA Output, for NMEA data output in an integrated system.
• Power/NMEA Input, for 12 V, 24 V or 32 V DC power connection, two
NMEA 0183 inputs and one RF ground (screen) connection.
To NMEA instruments
Figure 6-7:
The following sections detail the display unit connectors used when installing
a display. The remaining connector details are provided in Section 6.8.
POWER/NMEA
NMEA
OUT
NMEA IN 1
POWER IN
Chartplotter Display Connector Panel
To SeaTalk
TRANSDUCER
SeaTalk
instruments/GPS
R
G
Y
NMEA IN 2
6-13
D6112-1