3-30
You should always check the target waypoint before initiating a follow
route.
➤ To follow the current route:
1. Press the GOTO default soft key. The Goto/Follow soft keys are displayed.
2. Press the FOLLOW ROUTE soft key.
Alternatively, to follow a route:
1. Place the cursor over a route leg until the letters RTE and the route soft keys
are displayed then press FOLLOW ROUTE.
RTE
Your vessel's current position becomes the origin, and the target waypoint in
the current route becomes the active target.
The soft keys change as follows:
These options are described in the following sections.
➤ To follow the current route in reverse:
1. Press the ROUTE default soft key, followed by MORE. The route soft keys
are displayed.
2. Press the REVERSE ROUTE soft key. The current route is reversed on the
screen. Press ENTER or CLEAR.
3. Press the GOTO default soft key. The Goto/Follow soft keys are displayed.
4. Press the FOLLOW ROUTE soft key.
The soft keys change as follows:
These options are described in the following sections.
Alternatively:
RTE
1. Place the cursor over the route leg until the letters RTE and the route soft
keys are displayed. Press REVERSE ROUTE then FOLLOW ROUTE.
Your vessel's current position becomes the origin, and the target waypoint in
the current route becomes the active target.
SL520/530/631 PLUS Chartplotter Displays
D4251_1
D4172-1