Jeep 2002 WJ Service Manual page 256

WG
TORQUE CONVERTER (Continued)
1 - TURBINE VANE
2 - ENGINE ROTATION
3 - INPUT SHAFT
STATOR
The stator assembly (Fig. 174) is mounted on a sta-
tionary shaft which is an integral part of the oil
pump. The stator is located between the impeller and
turbine within the torque converter case (Fig. 175).
The stator contains a freewheeling clutch, which
allows the stator to rotate only in a clockwise direc-
tion. When the stator is locked against the freewheel-
ing clutch, the torque multiplication feature of the
torque converter is operational.
TRANSMISSION AND TRANSFER CASE
Fig. 173 Turbine
4 - PORTION OF TORQUE CONVERTER COVER
5 - ENGINE ROTATION
6 - OIL FLOW WITHIN TURBINE SECTION
1 - CAM (OUTER RACE)
2 - ROLLER
3 - SPRING
4 - INNER RACE
Fig. 174 Stator Components
21a - 115