Using The Thermal Jug; Opening / Closing The Lid; Pouring Coffee; Preparing Coffee - Silvercrest KH 1115 Operating Instructions Manual

Using the thermal jug

Opening / Closing the lid

➪ To open the thermal jug 0, turn the lid 9 so
far to the side that the arrow on the lid 9 points
. You can now lift the lid 9
to the symbol
upwards.
Risk of personal injury!
Should you want to remove the lid 9 directly after
the brewing process, ensure that you hold the lid 9
so that the hot condensed water, which can collect
on the lid 9, is not able to run onto your hand. Risk
of scalding!
➪ To close the lid 9, place it so that the arrow on
the lid 9 points to the symbol
so far back that the arrow on the lid 9 points to
the symbol . The lid 9 is now secured and
cannot fall off.

Pouring coffee

You do not have to remove the lid 9 from the thermal
jug 0 to pour coffee.
➪ With the lid 9 secured, press on the pouring
lever 8 and hold it down. You can now
pour out the coffee.
➪ When you have finished pouring, release the
pouring lever 8

Preparing coffee

➪ Swing out the filter holder 4 and insert a filter
bag (Size 1x4) with the sides folded. Put coffee
powder into it (medium to fine ground). For one
cup of coffee you will require about one measuring
spoon q of coffee powder. Subject to taste, the
amount of coffee powder can vary.
. Then turn it
.
➪ Fill the water tank 1 with the required amount
of water.
For this, use the scale 3 on the water tank 1.
Note:
• Never fill it with water for more than 10 large
cups/ 15 small cups. Pay heed to the Max
marking in the water tank. The appliance can
overflow. Before use, check to ensure that the
thermal jug 0 is empty.
• Before every brewing process, rinse the thermal
jug 0 with hot mains water. This will ensure that
the coffee remains hot for longer.
➪ Place the thermal jug 0 in the coffee machine.
➪ Press the switch 7 to start the brewing process.
The red indicator lamp glows.
➪ The coffee maker switches itself off automatically
when the brewing process has ended.
Note:
You cannot stop the brewing process manually.
All of the water that is in the water tank 1 passes
through the coffee maker. Should you wish to stop
the brewing process you must disconnect the plug
6 from the power socket.
➪ You can extract the thermal jug 0 and serve the
coffee when the red indicator light has extinguished.
Tip:
Should you wish to keep the coffee warm in the
thermal jug 0 for an extended period, remove the
thermal jug 0 from the coffee maker when the bre-
wing process is finished. When the thermal jug 0 is
standing in the coffee maker the lid 9, due to the
brewing mechanism, is pressed down. As soon as
the brewing process is complete, hot air escapes
through the lid 9. The coffee cools faster. When
the thermal jug 0 is removed from the coffee ma-
ker, the lid 9 closes itself automatically. The coffee
stays hot for longer.
- 4 -