Fujitsu AUU7RLF Design & Technical Manual page 25

 Overview
p
o
n
m
l
k
j
i
Display panel
x
w
v
a FAN button
Selects the fan speed (AUTO, HIGH, MED, LOW, and
QUIET).
b START/STOP button
Starts and stops operation.
c SET button (vertical)
Adjusts the vertical airflow direction.
d SET button (horizontal)
Adjusts the horizontal airflow direction.
e SWING button
Sets the automatic swing operation and selects swing
a
mode (Up/down, Left/right, Up/down/left/right, and Stop
b
swing).
c f RESET button
Used when replacing batteries.
d
g Timer set (- / +) button
Sets the current time and on-off time.
e
h TEST RUN button
Only used for the initial test in the unit installation.
i CLOCK ADJUST button
f
Used for adjusting the clock.
g
j TIMER MODE button
h
Selects the timer mode (off timer, on timer, program
timer, and timer reset).
k SLEEP button
Pressed to select sleep timer.
l ECONOMY button
m MIN. HEAT button
n SET TEMP. (temperature) (
• Sets desired temperature.
• Sets remote controller custom code.
q
o MODE button
• Switches operation mode (AUTO, COOL, DRY, FAN,
and HEAT).
• Starts/ends the remote controller custom code (max.
r
4 types) change.
p Signal transmitter
s
q Signal transmit indicator
t r Fan speed indicator
s Swing indicator
u
t Timer mode indicator
u Clock indicator
v Sleep indicator
w Operating mode indicator
x Temperature indicator
NOTE: Functions may differ by type of the indoor unit.
For details, refer to the operation manual.
- 19 -
/ ) button