Fujitsu AUU7RLF Design & Technical Manual page 16

 Wall mounted type
 Models: ASU7RLF1, ASU9RLF1, ASU12RLF1, and ASU15RLF1
• High efficient compact design
Making the tube thin:
Thin: 0.276inch (7mm)
0.197inch (5mm)
Volume reduction of heat
exchanger:
• Quiet operation
Airflow mode can be set in 4 steps and more detailed airflow setting is possible. 21 dB only at
cooling operation (22 dB at heating operation).
• MIN. HEAT Operation
*Not operable from the wired remote controller that is connected individually.
The room temperature can be set to go no lower than 50 °F (10 °C), thus ensuring that the
room does not get too cold when not occupied.
CAUTION
!
• When the room temperature is higher than 50 °F (10 °C), "MIN. HEAT" operation does not
start. Operation starts and maintains the room temperature at 50 °F (10 °C) when the
temperature drops below 50 °F (10 °C).
• When "MIN. HEAT" operation stops, the room set temperature quickly returns to the preset
temperature.
• Powerful operation
*Only available with Wireless RC.
20 minutes continuous operation by maximum airflow and maximum compressor speed is
possible. Rapid cooling and heating makes the room comfortable quickly.
▼
30%
Fan speed
Quiet
(7/9/12 TYPE)
"MIN. HEAT"
Button ON
68
°F
(20 )
°C
50
°F
(10 )
°C
- 10 -
• More comfortable airflow
Noise level
21
dB(A)
Indoor unit
operation START