8.
Select the setting number by pressing the
Each time the MODE button is pressed, it switches between the left digit and the right digit.
9.
Send the function mode information by pressing the TIMER MODE button once.
10.
Send the function setting information by pressing the START/STOP button once.
2 short beeps will be emitted from the indoor unit when the signal is received correctly. If wrong code
is set, no beep sound will be emitted.
NOTE: Press START/STOP button within 30 seconds after pressing TIMER MODE button.
Function details: Refer to Chapter 13-5.
or the
button.
Change digit
Pi Pi
Pi Pi
"Function details"
on page 150.
- 133 -