Help Guide | Recharging The Battery - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
Recharging the battery
1. Connect the IC recorder to your computer.
Slide the USB DIRECT slide lever on the back of the IC recorder in the direction
of the arrow, so that the USB connector appears. Then, insert the USB
connector into the USB port of a running computer. (*1)
While the battery is charging, "Connecting" and the battery indicator (
displayed in an animation.
When the battery is fully charged, the battery indicator will indicate "
When you charge the IC recorder for the first time, or when you have not used
the IC recorder for a long time, charge the rechargeable battery until the "
indicator appears on the display. It takes about 4 hours to fully charge an
exhausted battery. (*2)
*1
If the IC recorder cannot be connected to a computer directly, use the supplied USB
connection support cable.
*2
This is an approximation for the time it takes to charge from no remaining battery power
to full battery power at room temperature. It varies depending on the remaining power and
the condition of the battery. It also takes more time if the temperature of the battery is low,
or if the battery is charged while you are transferring data to the IC recorder.
Note
When you connect the IC recorder to a computer which is not running, the battery
will not be charged. Even if the computer is on, and the computer is in a mode of
reduced operation (standby or sleep), you cannot charge the battery.
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
Search
Print
) are
" ( ).
"
96