Sony ICD-SX733 Help Manual page 118

4-447-269-14(1)
© 2013 Sony Corporation
and .
When you set the minute and press
"Setting Completed" is displayed and the clock reflects the setting.
5. Press STOP to exit the menu mode.
Note
If you do not press within 1 minute of entering the clock setting data, the clock
setting mode is canceled and the window will return to the display of the stop mode.
The time is displayed either in 12-Hour with "AM" or "PM," or in 24-Hour, depending
on the "Time Display" setting in the menu. The default setting differs depending on
the country or region you purchased the IC recorder.
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
and controls used for operations are the same.
Hint
If you set the HOLD function to on while the IC recorder is stopped, the current time
will be displayed.
Related Topic
Selecting the clock display (Time Display)
, "Executing..." appears, and then
Go to Page Top
Go to Page Top
Notes on use
110