Recharging The Battery; Recharging The Battery Using A Computer - Sony ICD-TX50 Operating Instructions Manual

1
1
Preparing the Recorder

Recharging the Battery

Recharging the battery using a computer


Connect the IC recorder to your computer.
Use the USB connecting cable supplied with the IC recorder to connect the
 (USB) connector of the IC recorder and the USB port of a running
computer.
IC recorder
While the battery is charging, "Connecting" and
the battery indicator are displayed in an
animation.
When the battery is fully charged, the battery
indicator will indicate "
hour and 30 minutes to fully charge an
exhausted battery.
When you use the IC recorder for the first time,
or if you have not used the IC recorder for a
long time, recharge it fully until the "
indicator appears.
Computer
To USB port
of your
computer
USB connecting
cable
To  (USB) connector
. " It takes about 1
*1
Battery indicator
Fully charged indicator
" battery
Continued 