Help Guide | Setting The Clock - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
Setting the clock
You need to set the clock to use the alarm function or record the date and time.
When the clock is not set, the "Set Date&Time" animation appears, and then the
confirmation display ("Set Date&Time?") appears.
1. While the "Set Date&Time?" message is displayed, press
"Yes," and then press
The clock setting display appears and the year section begins to flash.
2. Set year, month, day, hour and minute.
Press or to set the year (the last two digits of the year), and then press
.
Repeat this procedure to set month, day, hour, and minute in sequence. You
can move the cursor to the year, month, day, hour and minute by pressing
or .
When you set the minute and press
When you finish setting the clock, the display window returns to the stop mode
display.
Note
If you do not press within 1 minute of entering the clock setting data, the clock
setting mode is canceled and the window will return to the display of the stop mode.
The time is displayed either in 12-Hour with "AM" or "PM," or in 24-Hour, depending
on the "Time Display" setting in the menu. The default setting differs depending on
the country or region you purchased the IC recorder.
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
.
, the clock reflects the setting.
Search
Print
or to select
107