Help Guide | Recording Sound From The Built-In Microphones – Agc Recording - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
Recording sound from the built-in microphones –
AGC recording
The following steps are the basic recording procedures using the specified
sensitivity setting and recording mode.
Note
Noise may be recorded if an object, such as your finger, etc., accidentally rubs or
scratches the IC recorder during recording.
Hint
Before you start recording, we recommend you make a trial recording first, or
monitor the recording.
1. Slide the POWER ON/OFF•HOLD switch in the direction of "POWER ON/OFF" to
turn on the IC recorder, or towards the center to release the IC recorder from
the HOLD status.
The stop mode window appears.
2. Select the desired folder.
3. Place the IC recorder so that the built-in microphones (
the source to be recorded.
Search
Print
) face the direction of
119