Help Guide | Monitoring Sound While Recording - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
4-447-269-14(1)
© 2013 Sony Corporation
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
Monitoring sound while recording
If you connect the supplied stereo headphones to the
can monitor the recording.
1. Connect the supplied stereo headphones to the
2. Press VOL –/+ to adjust the monitoring volume.
Monitoring volume does not affect to the recording level.
Note
When the cord of the headphones touches the IC recorder while you are monitoring
the recording, the IC recorder may record a rustling noise. The rustling noise can be
reduced by holding the cord away from the IC recorder.
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
and controls used for operations are the same.
Related Topic
Recording sound from the built-in microphones – AGC recording
Search
Print
(headphones) jack, you
(headphones) jack.
Go to Page Top
Go to Page Top
Notes on use
123