WeatherTech AlloyCover Installation Instructions And Owner's Manual page 8

REMOVAL AND REINSTALL OF COVER
REMOVE COVER
A. With cover completely open and storage clips secured, pull synthetic cord on front
panel and lift rear of cover up 1" above rails (Figure 1).
B. Slide cover back to disengage hooks then lift to remove (Figure 2).
REINSTALL COVER
A. Place leading edge of front panel on rails at front of box. Hold rear edge of folded cover
1" above rails (Figure 1) and slide cover hooks underneath front catch on each side
(Figure 2).
B. Lower cover and engage latch in retainment bracket on each side (Figure 1). Ensure
hooks are engaged by gently lifting corners of cover.
Rear
1"
Figure 1
8
Front
Figure 2