To The Power Cord; Digitizing A Gel; Positioning A Gel - Microtek Bio-1000F User Manual

Digitizing a Gel

Positioning a Gel

1. Lift up the scanner lid.
2. Place a gel to be scanned on the scan bed. Use the red arrow mark at front
3. Lower down the scanner lid.
Important: Make
sure that Calibration
window on the glass
surface is kept clear
and free of obstruction
at all times.
NOTE: When closing the scanner lid, make sure that it has been shut tightly;
otherwise, the light may leak and generate poor scan quality.
18 Bio-1000F User's Manual
of the scanner to align the scanned gel at center.
Use the red arrow
mark at front of the
scanner to align the gel
to be scanned properly
on the scan bed.