Radio Shack 7-in-1 Remote Control with Lighted Keypad Owner's Manual page 14

15-1924.fm Page 14 Monday, July 19, 1999 12:50 PM
5. Hold down
SET UP
light above turns on.
6. Press Plug 'n Power, then enter
the 7-in-1. The red light turns off.
7. Press Plug 'n Power on the 7-in-1.
8. To turn on all light and appliance modules set
to the same house code as the IR command
console, press
POWER (All Lts On)
in-1, or ALL LIGHTS ON on the IR command
console.
To turn off all light and appliance modules set
to the same house code as the IR command
console, press
MUTE (All Off)
or ALL UNITS OFF on the IR command con-
sole.
9. To turn specific lights and appliances on or
off using the 7-in-1 Remote Control, press
the digit key ( , ,
1 2
module you want to control. Then press
or (
Off CHANNEL + (On)
To control specific lights and appliances
directly from the IR command console, set
the console's selector to the number of the
module you want to control (
press the button on the console that corre-
sponds to the number of the module you
want to control (1/5, 2/6, 3/7, 4/8), then press
ON on the IR command console.
10. To brighten or dim lights connected to lamp
and appliance modules, press the digit key
for the module you want to control. Then
hold down
VOLUME + (Brt)
on the 7-in-1. Release the key when
(Dim)
the desired level of brightness is reached.
Note: You must select the individual light to
brighten or dim even if you used
on the 7-in-1 to turn on all the lights
Lts On)
at the same time.
Need help? Call 1-800-989-4706
14
on the 7-in-1 until the red
– on
0 – 1 4
on the 7-
on the 7-in-1,
, , , , , or ) for the
3 4 5 6 7 8
On
or
CHANNEL – (Off)
or
1–4 5–8
or
VOLUME –
POWER (All
).
),