Setting Up The System'srf Command Console - Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM Owner's Manual

15-1919.fm Page 9 Monday, July 19, 1999 12:34 PM
SETTING UP THE SYSTEM'S
RF COMMAND CONSOLE
After you set up the system's remote control, just plug
the RF command console's power cord into any stan-
dard AC outlet in the same room as your IR remote
controlled devices (TV, VCR, cable box, and so on) and
fully extend its antenna. Make sure the command con-
sole is pointed at the devices you want to control..
Need help? Call 1-800-950-7044!
9