INTRODUCTION Thank you for purchasing a RadioShack 8-in-1 LCD Remote. Your remote lets you control up to eight home entertainment devices with one easy-to-use, compact unit. After installing batteries (see next section), you can immediately use the RadioShack 8-in-1 LCD Remote to control Sony home entertainment devices, and a Dish Network satellite receiver.
INSTALLING BATTERIES Your RadioShack 8-in-1 LCD Remote requires four AAA batteries (not supplied) for power. Battery Use And Safety • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (that is, standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
FEATURES AND FUNCTIONS Use the illustration below to locate features on the RadioShack 8-in-1 LCD Remote and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see “Device Table”...
Key Charts Press this key… To… Enter programming mode. Turn the selected device on or off, or run the macro you programmed for the Power button (see “Setting the Power Macro” on page 20 for more information). Select a device to control. Display the menu for the selected device.
Page 8
Press this key… To… Exit the selected device's menu, guide, or program. Select the next or previous channel. Select the next or previous chapter on some DVD player models. Increase or decrease the sound level. NOTE: When the device that is set up does not support volume functions, the remote will send volume for TV.
Press this key… To… Control your VCR, DVD player, or Video On Demand (VOD) if available on your cable/satellite service. Control the functions of your PVR. Control the Picture in Picture (PIP) functions of your TV or VCR. Record a video program on a record- capable device (press twice).
SETTING THE LANGUAGE Before using your RadioShack 8-in-1 LCD Remote, you must set the default language (either English or Spanish). You cannot use your remote control until you have set the language. To set the language for your remote control for the first time, perform the following steps: After the remote powers up, the LCD displays English OK or...
keys to select either A or P. Use the Press OK once. 10. The LCD displays Success. 11. The LCD displays a day of the week. Use the keys to change the day if it is not correct. 12. Press OK once. The day is now set. 13.
Aim the remote control at your device (for example, TV). Press any key but OK , EXIT to test that the remote control works with your device. Use the keys to select a different code within the same brand, if any. Press OK to save. 10.
Page 13
AUX Code Device Type:___________________ CD Code Device Type:___________________ DVD Code Device Type:___________________ AUD Code Device Type:___________________ SAT/CBL Code Device Type:___________________ TV Code Device Type:___________________ PVR Code Device Type:___________________ VCR Code Device Type:___________________...
Programming a Device by Searching for Its Code If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code. For example, to search for a code for your TV: Press and hold P until the LCD displays Code Set OK or...
USING MY SYSTEM MODE The RadioShack 8-in-1 LCD Remote includes a custom Home Theater mode. After the My System key is programmed, it will allow you to access four groups of remote control keys without having to change device modes. Control Organization About Control Groups For Home Theater programming, the remote control’s...
If the default settings fit your needs, you can skip programming this mode. Otherwise, perform the steps in the following section to assign device modes to the Control Groups. PROGRAMMING MY SYSTEM MODE Press and hold P until the LCD displays Code Set OK or .
• For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning. Programming a Learned Key Press and hold P until the LCD displays Code Set OK or .
The LCD displays Press Mode or Press the mode key once (i.e., TV, VCR , PVR, CBL/ SAT, CD, DVD, AUX, or AUDIO) for the mode you want to delete the learned key from. The LCD displays DLT Key or .
The LCD displays Press To Mode. For the destination mode, press a desired device key once (i.e., AUX, CBL/SAT, CD, TV, DVD, AUDIO, VCR, or PVR). For this example, press DVD once. The LCD displays Press To Key. For the destination key, press a key to be moved once.
PROGRAMMING FAVORITE CHANNEL SCAN The remote allows you to store a list of up to 10 favorite channels, in any order, that are immediately scanned when you press FAV (SCAN). NOTE: You can only store channels from one device for Favorite Channel Scan. Press and hold P until the LCD displays Code Set OK or Use the use the...
Page 21
To set the Power macro: Press and hold P until the LCD displays Code Set OK or Use the keys to scroll through the LCD display until Macro is displayed. Press OK. The LCD displays PWR Macro. Press OK. The LCD displays Add Macro. Press OK. The LCD displays Press Mode IN or Press the mode key for each device you want to add to the power macro in the order they should...
The LCD displays Press Keys In. When you press you can continue reading instructions. Press the keys for the macro in the order they should occur. For example, press TV and then Chan When you have finished programming your key macro, press and hold P until the LCD displays Success and exits.
The LCD displays Press Keys In. When you press you can continue reading instructions. Press keys in the order they should occur in your time macro. After the first key press, the LCD displays Hold P to Save. Press and hold P until the LCD displays Success and exits.
The LCD displays Are u sure OK or . Press OK. The LCD displays Success and the remote exits. CHANGING VOLUME LOCK The RadioShack 8-in-1 LCD Remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one device's volume controls volume in all other modes.
Unlocking All Volume Control (Restoring Global Unlock) Press and hold P until the LCD displays Code Set OK or Use the keys to scroll through the LCD display until Vol Lock is displayed. Press OK. Use the keys to scroll through the LCD display until Unlock All is displayed.
RESETTING THE REMOTE Your RadioShack 8-in-1 LCD Remote allows you to reset your remote. Doing so clears all setup features not related to ID code setup (for example, macros, Key Mover, volume lock, etc.). To Reset Your Remote: Press and hold P until the LCD displays Code Set OK or keys to scroll to Reset.
TROUBLESHOOTING PROBLEM: LED does not blink when you press a key. SOLUTION: Replace batteries with four (4) new AAA alkaline batteries. PROBLEM: LED blinks when you press a key, but device does not respond. SOLUTION: Make sure the remote is aimed at your device and is not more than 15 feet away.
Page 28
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Setup Codes for CD Players Códigos de configuración para reproductores de CD Acoustic Research 30420 Adcom 30155 Admiral 30305 Aiwa 30157 Arcam 30157 Audio Alchemy 30194 Audio Pro 30437 Audio Research 30157 30194 Burmester 30420 Cairn 30157 California Audio Labs 30029 Cambridge Soundworks 30157...
Expressvu 00775 Hughes Network Systems 01142, 01442 01170 Motorola 00869 Philips 01142, 01442 Proscan 00392 01392 Samsung 01442 Sony 00639, 01640 Star Choice 00869 Controlled by the VCR Controlados por el VCR Hughes Network Systems 20739 Philips 20739 Samsung 20739 Setup Codes for DVD Players Códigos de configuración para reproductores de DVD 3D LAB...
Setup Codes for TV/DVD Combos Códigos de configuración para combinados de TV/DVD Controlled by the Television Controlados por la TV Accurian 11803 Akai 11675 Audiovox 11937 Axion 11937 Cinego 11986 11948 Controlled by the DVD Controlados por el DVD Accurian 20677 Akai 20143, 20695...
Symphonic 20821 Toshiba 21045 Controlled by the VCR Controlados por el VCR Sharp 20807 Setup Codes for Video Accessories Códigos de configuración para accesorios de video 01272 Accurian 01653 Alienware 01272 Allegro 00160 Archer 00160 Astro Text 01141 Bantor 00160 Centronic 00160 CyberPower...
(90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete warranty details and exclusions, check with your local RadioShack store. RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 04/04 02A07 Cat No. 15-100 Printed in China...