Sequences - Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM Owner's Manual

15-1919.fm Page 15 Monday, July 19, 1999 12:34 PM
Notes:
• You must enter a zero before a single-digit
channel number (01, 02, 03, and so on).
• If you normally press
channel number to change to a new channel,
you must press
ENTER
5. Repeat Step 4 to continue entering channels you
want to include in your favorite channel scan list.
After you have entered the last channel number,
hold down (the last time) until the red indi-
SET UP
cator light blinks twice.
6. To scan through your favorite channels, press
and keep the system's remote control
SCAN
aimed at your TV. The remote control scans
through the selected channels, stopping on each
one for 3 seconds. To stop scanning, press any
key on the remote control.
Note: You can only set up the favorite channel scan
feature for one device at a time. To clear the favorite
channel list, press and hold down
indicator light blinks twice. Then press
, and hold down
SET UP SET UP
red indicator light blinks twice.

Sequences

You can use
AUDIO SEQ
RF Remote Control System's remote control to send a
set of commands at the press of a button. Any se-
quence of commands you regularly perform can be re-
duced to a single keypress.
For example, you might want to turn on your TV and ca-
ble box, then set the cable box to Channel 3.
Follow these steps to set up that sequence.
1. Press and release
TV
until the red indicator light blinks twice.
SET UP
2. Press
9 9 5 VIDEO SEQ
3. Enter the desired sequence. For example:
TV PWR CBL PWR 0 3.
Need help? Call 1-800-950-7044!
after entering a
ENTER
instead of .
SET UP
until the red
SET UP
9 9 6 SET UP
the last time until the
or on your 6 in 1
VIDEO SEQ
, then press and hold down
.
15