Customizing Your Rc5400; Introduction; Cloning All Your Existing Remotes - Marantz RC5400 User Manual

Customizing your RC5400

1.

Introduction

It is best to proceed with customizing in several stages.
The first stage is to teach all of your existing remote codes to the
RC5400. The second stage is to practice using your home theater
system with the RC5400. As you gain familiarity with your system,
you'll notice that many operations in a home theater require several
steps. In the third stage of customization, you will record multiple
step operations as either a "Macro" that you can play back with one
button push or as a list of numbered steps recorded in a "Help List"
device group.
In the next few pages you'll find step by step guidelines on each of
the three stages. When a more detailed explanation can be found
in the Reference section, we've noted the page.
2.

Cloning All Your Existing Remotes

1 Gather all of your remote controls in front of you.
2 Play with all of the example devices. Compare the devices with
3 Use DELETE mode to delete all of the devices that you don't
4 Use ADD mode to add the devices for each Marantz compo-
5 Use ADD mode to add a devices for each non-Marantz com-
6 Switch to LEARN Mode to evaluate the page layouts of the new
User Guide
your existing remote controls. Can you use any as templates for
non-Marantz components?
use (see page 37).
nent (see page 35-36).
When you are prompted to add with or without RC codes, choo-
se "WITH RC CODES".
ponent (see page 36). Choose "WITHOUT RC CODES".
devices.
16