Telematrix Marquis series User Manual

Dect 6.0 & 1.8ghz cordless series marquis series

Advertisement

Quick Links

5025 Galley Road
Colorado Springs
Colorado 80915 USA
1.800.462.9446 domestic
+1.719.638.8821 international
www.telematrix.net
DECT 6.0 & 1.8
Cordless Series
DECT MWD5 • DECT MWD • DECT 2MWD5 • DECT 2MWD
User's Guide
Single & Two Line • 10 or 5 Button
Cordless Speakerphones with Optional Charging Stations
1.800.462.9446 domestic
+1.719.638.8821 international
www.telematrix.net
GHz
41
Telephone Underside:
39. Base underside sticker information:
Certification - FCC, CE, ETL, RoHS
Version label
Model name
REN number
Disposal label
QC label
Series number
Warranty Void If Seal Broken label
40. Voltage Settings - 24V, 48V & OFF
for Line 1 & Line 2.
(factory set at 24V)
Line Voltage 24-52VDC (+/-)
Line Current 15mA to 80mA
Ringer Equivalance - 0.6B
41. Non-Slip rubber feet (4)
39
40
Cordless Handset Charging Station:
42. Message Waiting indicator
42
43. Cordless Handset
44. Handset Pop-Off Cover for
battery compartment.
45. Interchangeable Accent Piece, to
match custom cradle color # 21.
46. AC Power Plug-In. (back of stand)
47. Battery Charging & Synchronization
programming indicator light.
48. Cordless Handset Charging Stand.
Handset will charge regardless of
43
whether it is placed with either front
or back showing.
Power Adaptor:
49. Phone Line
44
from wall goes
49
45
into Line
46
receptacles.
47
50. Line to Phone
from Adaptor.
48
50

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Marquis series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Telematrix Marquis series

  • Page 1 Power Adaptor: 49. Phone Line from wall goes into Line receptacles. 5025 Galley Road 50. Line to Phone Colorado Springs from Adaptor. Colorado 80915 USA 1.800.462.9446 domestic +1.719.638.8821 international www.telematrix.net 1.800.462.9446 domestic +1.719.638.8821 international www.telematrix.net...
  • Page 2 DECT 6.0 & 1.8 Series Features: • Line Powered - Single & Two Line Telephones • DECT Non-Interference cordless technology • SteelTrap memory technology (EEPROM) ™ • TouchLite one-touch message waiting retrieval ™ DECT Base: 1. Industrial grade construction, smooth plastic finish Speaker ( half duplex) 3.
  • Page 3 Please feel free to check on its progress by calling your regional PriorityCare. If the Compliance and Safety Manual is not immediately available. Please obtain a free copy by calling our Priority- Care department (+1.719.638.8821) or by downloading a copy on our Internet web site (www.telematrix.net).
  • Page 4 nstallation... Caution Information - • Never install telephone or network wiring during a lightning storm. • Never install telephone or Ethernet jacks in wet locations unless the jack is specically designed for wet locations. Statement of Limited Warranty • Never touch uninstalled telephone wires or terminals unless the telephone line has been disconnected at the network interface.
  • Page 5 Syncing Handset... Settings... Registering DECT Handset with a Specic Base Unit: Line Voltage Selectors (optional feature) - # 40 1. Place handset into base (or charging station) for 10 minutes before attempting the handset DECT telephones are equipped to operate behind a PBX telephone systems rated “sync”...
  • Page 6: Handset Battery

    Indicators... Handset Battery... Speaker & Mute Key Connecting & Status Indicators - # 15 & 19 Charging the Handset Battery: (On Base and Charging Station) Speakerphones are equipped with LED indicators to show the current feature key status. The handset Battery is a Ni-Cd battery. This battery requires a Full charge prior to use •...
  • Page 7: Message Retrieval

    Handset Locate Key - # 13 Calling... The DECT Cordless Series is equipped with a handset locator feature key located on Placing a Call Using the Handset - # 1 the base # 13. • Lift the handset. Simply press the “LOCATE” button on the base unit. = LOCATE key.
  • Page 8 Programming... Some of these programming keys are located under the faceplate and overlay, begin by lifting up faceplate and overlay, by either a paperclip or sharp pointer. “Flash” hook function - Flash # 5 & # 13 The Flash function is used to access PBX features or Telco line features such as Call Waiting.

This manual is also suitable for:

Marquis dect mwd5Marquis dect 2mwd5Dect mwdMarquis dect 2mwdMarquis dect mwd

Table of Contents