Chicago Electric 66098 Set Up And Operating Instructions Manual
Chicago Electric 66098 Set Up And Operating Instructions Manual

Chicago Electric 66098 Set Up And Operating Instructions Manual

1600w heavy duty heat gun

Advertisement

1600W Heavy duty Heat gun

Set up and Operating inStructiOnS

visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
Save tHiS Manual.
©
Copyright
2008 by Harbor Freight Tools
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due
to continuing improvements, actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
Cover Revised 11a
Model
66098
®
. All rights reserved. No portion of this manual or any

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 66098 and is the answer not in the manual?

Questions and answers

Wayne Diana
February 11, 2025

My 66098 stopped heating up. Is the heat element repalceable?

1 comments:
Mr. Anderson
February 12, 2025

The heating element is listed as a part in the manual, but there is no indication that it is available individually as a replacement part. Some parts are listed for illustration purposes only and may not be available separately. Therefore, it is unclear if the heating element is replaceable.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Chicago Electric 66098

  • Page 1: Set Up And Operating Instructions

    Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
  • Page 2: Important Safety Information

    SKU 66098 For technical questions, please call 1-800-444-3353. nOtice is used to address practices not related to personal injury. cautiOn, without...
  • Page 3 Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for SKU 66098 For technical questions, please call 1-800-444-3353. appropriate conditions will reduce personal injuries. c. prevent unintentional starting.
  • Page 4: Heat Gun Safety Warnings

    Lingering or pausing in one spot could ignite the panel or the material behind it. SKU 66098 For technical questions, please call 1-800-444-3353. Extreme care should be taken when stripping paint. The peelings, residue and vapors of paint may contain lead, which is poisonous.
  • Page 5 Clean up all removed paint and dust by wet mopping the floors. SKU 66098 For technical questions, please call 1-800-444-3353. Use a wet cloth to clean all walls, sills and any other surface where paint or dust is clinging.
  • Page 6 12. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 13. Avoid unintentional starting. Prepare to begin work before turning on the tool.
  • Page 7: Grounded Tools: Tools With Three Prong Plugs

    SKU 66098 For technical questions, please call 1-800-444-3353. of electric shock. (See 3-prong plug and Outlet.) The grounding prong in the plug is...
  • Page 8 12.1 – 16.0 16.1 – 20.0 * Based on limiting the line taBle a voltage drop to five volts at 150% of the rated amperes. SKU 66098 For technical questions, please call 1-800-444-3353. n 0 xxxx/min. Symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc.
  • Page 9: Specifications

    When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Operating inStructiOnS...
  • Page 10 Wood worm infestation may be controlled. Do not heat up the wood surface too much or it can burn. SKU 66098 For technical questions, please call 1-800-444-3353. never touch work area with the Heat gun; it could scorch or ignite.
  • Page 11: Maintenance And Servicing

    1. Power Switch set at “0”. 2. No power at outlet. 3. Cord not connected. Unsatisfactory results. 1. Improper heat setting. SKU 66098 For technical questions, please call 1-800-444-3353. for loose screws, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
  • Page 12: Parts List

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 66098 For technical questions, please call 1-800-444-3353. partS liSt...
  • Page 13: Limited 90-Day Warranty

    90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents

Save PDF