Replacing The Power Button Card - ThinkPad 11e 5th Gen User Manual

4. Close the computer display and turn the computer over. Connect the keyboard cable connector to the
1 2
system board . Install the screws to secure the keyboard
5. Reinstall the base cover assembly.
6. Turn the computer over. Connect the ac power adapter and all cables to the computer.

Replacing the power button card

Before you start, read "Important safety information" on page v and print the following instructions.
To replace the power button card, do the following:
Attention: Sensitive components are mounted on the power button card. Avoid any kind of rough handling
during the replacement.
1. Disable the built-in battery. See "Disabling the built-in battery" on page 84.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display, and turn the computer over.
4. Remove the base cover assembly. See "Replacing the base cover assembly" on page 85.
92
11e 5th Gen and Yoga 11e 5th Gen User Guide
3
.