Dynojet Power Commander V Installation Instructions page 5

FIG.G
FIG.H
Unplug
12-002
Unplug
www.powercommander.com
12 Unplug the stock O2 sensor from the main wiring harness on the left hand side
(Fig. G).
This connector is located near the lower ignition coil.
13 Unplug the stock O2 sensor from the main wiring harness on the right hand
side (Fig. H).
This connector is located near the lower ignition coil.
The stock O2 sensors will no longer be connected to anything. They can be
removed completely from the exhaust if desired and if you have a way to plug the
holes in the exhaust.
14 Make sure all connections are secure and wiring harness routing is free and
clear of any hot or moving parts. Reinstall the seat.
2005-2013 BMW R1200 R/RT - PCV - 5