Restarting The Saveris Base - TESTO Saveris Instructions Manual

7 Maintaining the product
6. Confirm software message
restarted
7. Select the directory to which the backup file should be saved.
8. Click on [Save].
- *bi2 file with backup data is saved.
Pos: 203 /TD/Produkt instand halten/testo Saveris/Base neu starten @ 12\mod_1339775093729_79.docx @ 130896 @ 3 @ 1
Saveris
7.5.

Restarting the Saveris base

✓ The Saveris base display shows
1. Press
- Shutdown
switches off.
2. Press [ESC].
- The Saveris base is started.
184
Do not press any other keys on the Saveris base.
with [OK].
The stored data can only be imported to a Saveris base
with the same firmware status. The memory capacity of the
target base must be larger than or equal to the source
base. For the memory size, see the
window.
To transfer the saved data to a Saveris base, please
contact Customer Service.
Only carry out these steps if they will resolve the problem
indicated by the relevant alarm message, see Saveris base
alarm messages, page 216.
[ESC] twice in rapid succession.
appears on the display and the Saveris base
For backup, the base must be
Select language
Info Base.