2, Dhw, Cooling); Time Program Functions - Fujitsu WATERSTAGE 112 Maintenance Document

Heat Pump, Split System, Single Service, 3 phase
6.3.3 Time Program Functions (heating circuit 1 & 2, DHW, cooling)
Several control programs are available for the heating
circuits and the production of DHW. They are initiated
in "Automatic" mode and control the change in
temperature levels (and therefore the associated
setpoints, reduced and comfort) via the adjusted
changeover times.
Changeover Points
Line no.
HC1 HC2 4/DHW
500 520 560
501 521 561
502 522 562
503 523 563
504 524 564
505 525 565
506 526 566
Standard Program
Line no.
516, 536, 576, 616
All time programs can be reset to factory settings.
Each time program has its own command line for this
reset action.
Maintenance Document 1394-1
Programming line
5
600 Preselection
(Mon-Sun / Mon-Fri / Sat – Sun / Mon...Sun)
st
601 1 phase On
st
602 1 phase Off
nd
603 2 phase On
nd
604 2 phase Off
rd
605 3 phase On
rd
606 3 phase Off
Programming line
Default values
(No /Yes)
Enter changeover times:
Changeover times can be adjusted in a combined
way, i.e., identical times for several days or distinct
times for certain days. Preselecting groups of days
(e.g., Mon...Fri and Sat...Sun) having the same
changeover times makes
changeover program considerably shorter.
In this case, individual settings will be lost!
adjustment of the
73