Dual Watch - Cobra HH 50 WX ST Operating Instructions Manual

Operation

Dual Watch

Dual Watch
Dual Watch allows simultaneous monitoring of two
user selected channels. For example, to monitor
Channel 11 and 17 for incoming transmissions:
Note
Set Desired Squelch Setting (DSS).
1
To set Desired Squelch Setting
Select Channel 11 with CHANNEL UP/
(DSS) see Setting Squelch on 2
DOWN key.
pages 4 and 5.
Push and release PROGRAM key.
3
PROGRAM icon will be displayed.
Note
At a later time you can recall
your last preset DW channels by
pushing and releasing the
Push and hold PWR SAVER/CH9/19/DW key
4
FUNCTION key and quickly
until "beep" is heard.
pushing and releasing the
DW key.
The DW icon will flash and the PROGRAM icon
will disappear.
12
PROG
+30
SIGNAL
9
5
3
1
S T
0.5 1 2 3 4
PROG CB / WX SCAN
DW
+30 SIGNAL
9
5
3
1
S T
0.5 1 2 3 4
ashing
icon
PROG CB / WX SCAN
PUSH &
HOLD
Select Channel 17 with CHANNEL UP/
5
DOWN key.
DW
+30 SIGNAL
9
5
3
1
S T
0.5 1 2 3 4
PROG CB / WX SCAN
PUSH &
RELEASE
Push and release PWR SAVER/CH9/19/DW key,
6
a "beep" will be heard.
The DW icon will stay on.
PROG CB / WX
The HH 50 WX ST display will switch between
7
the selected channels.
To stop dual watch, push CHANNEL UP/ DOWN
8
key, or turn the radio off.
Operation
Note
When a incoming transmission
is received the HH 50 WX ST will
stop monitoring and remain on
the channel. After 10 seconds the
radio will continue to monitor the
2 channels.
SCAN
13