Advertisement
8.9 System Setting
• Country Setting - Press u key to change the country
• OSD Language - Press u key to change the OSD Language.
• TV Format - Press u key to change the TV Format.
• Video Output - Press u key to change the AV output from
phono (RCA) to HDMI. (This action will only work if the meter
is connected to an HDMI display).
• TV Resolution - For HDMI output only Press u key to select:
Auto/720i @ 50Hz/1080i @ 50Hz/1080p @ 50Hz TV resolution.
• Digital Audio Output - Press u key to change the audio
output format from LPCM to RAW.
• Time Zone - Press t u key to change the Time Zone.
• Channel Lock - Press u key to switch Channel Lock ON
To open channel lock, you will need to input the password
(default password is 0000).
• PWR Unit - Press u key to change the units used for power
dBµV/dBmV/dBm
• Key Beep Tone - Press u key to switch key beep tone ON/OFF.
• Flashlight - Press OK u key to switch the Flashlight ON/OFF.
• Upgrade - Press OK to update the firmware from a file loaded onto a connected USB device.
Use the direction key to select the update file, and press OK to update.
Warning: Please don't turn power off or disconnect the USB device while upgrading as this can,
damage the meter's software, and prevent the meter booting up.
• Factory Setting - Press u key, then press OK to confirm you want to do a factory reset.
PLEASE NOTE: if you reset, the database and all the user settings will be reset.
12
S401 - Auto Scan / TP Manager
!
!
Advertisement
