Advertisement
8.7 Satellite Installation
• Satellite settings
• Auto scan
• TP manager
8.7.1 Satellite Setting
In the Satellite Setting main menu:
Press the Red key to enter the Transponder screen.
Press Green key to enter the Auto Scan screen.
Press pq keys to move the cursor to select a satellite press OK.
Press u to access the individual satellite properties.
Once in the individual satellite properties screen:
1. TP Manage press Red key to enter the TP manager screen.
2. Auto Scan: press the Green key to enter the Auto Scan.
3. LNB: Press t u key then change the LNB frequency.
4. Transponder: Press t u key to change the current TP .
5. DiSEqc 1.0: Press t u key to change the DiSEqC port.
6. DiSEqc 1.1: Press t u key to change the DiSEqC port.
7. Motor: Press t u key to change the DiSEqC port.
If you are selecting DiSEqC1.2/USALS, press OK to
enter the motor interface.
• Transponder: Press OK to change the current TP.
• Mode: A, Position
A1 Direction: Press t u key to move direction to west or east.
A2 Position: Save the dish position for the satellite.
• Mode: B, Drive to Zero
Move the cursor to GO, then press OK, the motor will move to zero.
• Mode: C, Drive to stored position
Move the cursor to GO, then press OK, the motor will go to the position saved in mode A Position.
• Mode: D, Drive to Satellite
Move the cursor to GO, then press OK , the motor will go to the auto calculate position.
• Mode: E, Recalculate
E1 Direction: Press t u key to move direction to west or east.
E2 Recalculate: Recalculate the satellite position.
• Mode: F, Set East Limit or Set west Limit to restrict the motor movement to the East or to the West.
F1 Direction: Press t u key to move direction to west or east.
F2 Store: Save the satellite position of A2
• Mode: G, Set Limit enable or disable - Set the limit enable or disable.
8. Unicable: Press t u key to select Unicable then press OK into the Unicable setting.
• Transponder: Press t u key to change the current TP .
• IF Channel: Press t u key to change SCR channel.
• Center Frequency: Use number key to input number.
S401 - Satellite Installation / Setting
!
!
!
!
!
!
9
Advertisement
