Document ID: 2098080
Note: Different injectors are calibrated for different flow rates. When ordering new fuel
injectors, be certain to order the identical part number that is inscribed on the old injector.
1. Lubricate the new fuel injector O-rings with engine oil. Install the new O-rings on the fuel
injectors.
2. Install the fuel injectors into the fuel rail sockets with the fuel injector terminals facing
outward.
3. Install the fuel injector retainer clips onto the fuel injectors and the fuel rail ledge.
4. Make sure that the clip is parallel to the fuel injector harness connector.
5. Install the fuel rail assembly into the cylinder head.
Caution:
Refer to
http://localhost:9001/si/showDoc.do?docSyskey=2098080&pubCellSyskey=124968&pubO...
Fastener Caution
in the Preface section.
Page 5 of 7
7/5/2010